A lot of car owners believe that there is no point on knowing how to reset oil life on 2015 Jeep Grand Cherokee. For them, the procedure seems complicated. Since most car owners don’t have any technical or mechanical background or knowledge, they don’t believe in their own selves to do the method. In reality, doing the reset is easier than you think. As long as you know how, and if you are confident enough to do the reset, you should be able to this on your own. And you won’t even have to worry about damaging your car.
General Methods on How to Reset the Oil Life Indicator
Watch for any light up sign or symbol. When the light for ‘Oil Change Required’ is on (you probably see it quite clear on the display screen), it means that you need to change the engine oil right away. If it continuously on, you probably have exceeded the following (scheduled) change interval. After you have changed the oil (probably with other maintenance procedures), you still need to deal with the proper reset of the indicator light.
Here’s the step on how to reset oil life on 2015 Jeep Grand Cherokee:
- There are several different ways to do the reset. The first one is by using the gas pedal. This is considered the most popular (and also the easiest) option to reset the oil indicator. As the name suggests, you simply access the gas pedal to start off everything.
- Turn the car’s ignition to the position ’Run’ without even starting your engine
- Depress your gas pedal fully. Do this 3 times in 10 seconds
- You can turn the ignition off now
- Start the engine to verify the reset. If you start it on and the reset is back to 100%, then you have been successful in performing the job.
Besides the gas pedal, you can also use the cluster display method. This is applicable for 2016 model year and above. The instrument cluster can be found on the steering wheel.
- Turn your ignition on position ‘Run’. Don’t start the engine. If your car has the keyless system, press the button ‘Stop/Start’ twice, and do this without actually pressing on the brake pedal
- Access the navigation button (which is on the steering wheel) to find the ‘Vehicle Info’
- Scroll until you find the ‘Oil Life’ menu. Again, just use the right or left arrow (navigation) button
- Press OK button and hold it for several seconds so you can perform the oil life reset.
Reset the Oil Indicator between 2013 and 2020 Model
If your Grand Cherokee year model is from 2015 to 2020, you should know how to reset oil life on 2015 Jeep Grand Cherokee:
- Check all doors. They are all should be closed properly. Set it to position ‘Park’
- Activate the ignition to the position ‘Run’, but make sure that you don’t start the engine on.
- Find the navigation button because you are going to use it to maneuver your way around. Scroll up so you can navigate to ‘Vehicle’. Then scroll right so you can display the information of the ‘Oil Life’
- While the information is displayed in front of you, press the OK button and then hold it off for a while. When the display shows 100%, you can release it.
- Turn the ignition off now. You have done the reset.
- If you want to check it out, this time turn the engine on. The indicator should show 100%
Keep in mind that different model years would lead to a slightly different procedure. In general, most of them are almost the same, but some detailed steps may be a bit different. You should always consult your manual to learn more about the proper way to care your ride.
Signs You Should Change the Oil
Even when your indicator light doesn’t light up, it doesn’t mean that everything is good down there. There is a possibility that you may even need a change, even if the indicator light doesn’t go on. Your vehicle’s health should be maintained and cared, and the only way to do so is to check the oil quality and level regularly. If not, your engine may suffer from serious damage, and it won’t cost you a lot of money, but also time and energy.
The most obvious signs:
- The engine doesn’t run smoothly or well. It’s because the oil is dirty and it looks dark. When it happens, you don’t need to wait until the indicator is on. Replace the oil before the existing one does more damage than good
- Be aware if you smell oil in the cabin. There are two possibilities of why it happens. First, your system suffers from an oil leak. Second, the engine is burning oil. Either way, none of them is good. You want to change the oil immediately.
- Pay attention to unusual sound, especially from under your hood. If the engine noise is somewhat louder than the normal one, or you even have loud knocking noise, there is a possibility that the oil level is low. As a result, your engine can’t run smoothly
- If you see smoke coming out from your vehicle or the tailpipe, it’s even a bad warning sign. It’s likely you have oil leak within the engine. You must change the oil and have your car checked.
Final Words
As you can see, all of these bad signs may have happened even when your indicator is normal and working well. Imagine how bad the condition is if the indicator light isn’t functioning properly or it’s not being reset right. Knowing how to reset oil life on 2015 Jeep Grand Cherokee isn’t enough if you don’t care for your ride properly.
This is why performing a regular oil change is crucial and imperative. As the change is happening, a reset should take place. You can change the oil at a trusted garage or do it yourself. If there is an official dealership in your area, it’s even better if you take your car there to get the proper care. So, if you do have a 2015 Cherokee, make sure you learn the proper way about how to reset oil life on 2015 Jeep Grand Cherokee and don’t neglect the proper care.