Whereas most people believe that the information about how to reset oil life on Jeep Cherokee 2015 isn’t that crucial or important, you’d know the reality. Oil life indicator should stay within its peak performance because it is the one part in your car that would inform you about your engine oil condition. Unfortunately, many car owners don’t think of this as an important care. They often underestimate it, which can take a serious effect to your car’s performance and also safety.
About Jeep Cherokee and Oil Life Indicator
All cars are basically the same: They have features that help them care of their ride to ensure comfort and safety. All Jeep variants have this oil indicator light which would turn on when oil change is needed. If it is off, then you aren’t in the condition that requires oil change. But once it is on, you should be aware of it.
Why should you know how to reset oil life on Jeep Cherokee 2015? You see, when you change the oil at a professional garage or at the dealership, the technician would reset the indicator light. It’s something that they do ‘automatically’. However, it’s not always the case. If you are unlucky enough to pick the not-so-professional service, the technician may have ‘forgotten’ to reset the indicator.
Moreover, the knowledge can be quite useful if you perform the oil change on your own at home. If you decide to change your Jeep’s engine oil yourself, it’s you who is responsible for resetting the indicator light. After all, the process itself isn’t that complicated or difficult. Even if it’s your first time doing this, you shouldn’t have any issue figuring it out.
The Importance of Oil Life Indicator
Each time you change the oil, the indicator light should be reset to 100%. It’s because 100% would show that the oil condition is still new and ‘fresh’. As time passes by, the numbers would decline, which shows the quality of the oil. When it has reached 20%, your car is basically ‘telling’ you that the oil needs change; that it’s on the verge of being bad. Don’t go lower than 20% because the oil may do you more harm than good if you continue to 0%. At this point, the oil is no longer good and you risk damaging your vehicle. This is another crucial reason why knowing how to reset oil life on Jeep Cherokee 2015 is important. If you can’t depend on others, at least you can rely on yourself.
Don’t forget to reset the indicator light each time you get the oil change. When it’s due time, the light would usually light up. If you don’t reset the indicator light, you are basically risking not only your vehicle but also your safety. It’s quite dangerous to drive a car whose oil has been bad or poor.
Managing the Resetting Effort
No need to worry. Once you know how 2015 grand cherokee oil reset works, it won’t be as difficult as you think.
- Turn your ignition to the position ‘Run’. Don’t (fully) start the engine. You only want to turn the key until you see the dash lights are turned on
- Your steering wheel has the control buttons which you should use to scroll the available ‘Settings’ menu. Once you access the menu, click (and press) the right arrow button
- You should now see the ‘Settings’ menu. Find the ‘Vehicle Menu’ and press that right arrow once more
- Inside the ‘Vehicle Menu’, you should be able to find the section for ‘Oil Life’. Use that right (arrow) button again
- Press the OK button (located on the steering wheel) and hold it down until you see the notification ‘Reset Successful’
- At this point, you can turn off the ignition.
- Now, start your engine completely and check whether the reset is true and successful. If it shows 100%, pat yourself on the back. You’ve done it!
How to Reset the Indicator on Newer Models
You may have known how to reset the oil life for 2015 model, but do you know how to manage the reset on the newer year models? When the indicator light is on, it’s your notification that you need to change the oil right away. There are several ways to do so. In the first way, you need to:
- You need to make sure that the gear is on the position ‘Park’
- Press the Stop/Start button to ‘Run or On’ without starting the engine
- You need to press the acceleration pedal. Do it 3 times in 10 seconds
- Doing this action should reset the indicator light to 100% again
- You can press the Stop/Start button to turn everything off
- If you want to check the condition of the reset, start the engine. The indicator is supposed to be showing on 100%
Another option is to start with the gear on position ‘Park’. Then you can follow these procedures:
- Press Stop/Start button so you can turn the electronics without starting the engine on. Do this without you having to hold the brake pedal
- There are buttons and options on your steering wheel. Choose ‘Vehicle Info’ and then go with ‘Oil Life’
- Push the OK button and hold it for several seconds. See the percentage which should change to 100%
- Press again the Stop/Start button so you can turn off the vehicle
What should you do when these methods don’t work? Try to repeat that again slowly and carefully. Make sure to perform the steps one by one. If you are still unsuccessful, ask for a professional help. Go to the local dealership in your area. They should know how to help you and how to manage the reset properly and correctly.
Conclusion
Knowing how to manage the resetting process can be quite helpful and insightful. When you know how to manage the process in older and newer model years, it can be even better. When you already know how to reset oil life on Jeep Cherokee 2015, you can be confident how to manage everything on your own.